Rear Bumpers
Brian Deren, Puyallup Wa With help from the guys over at NWJeepn.com Brian put together this great looking and very functional rear bumper with swing out tire carrier which will also hold gas cans and a high-lift jack. "Your pre-bent tire hoop, hinge hub and spare tire plate made this project so much easier and quicker and the bumper turned out great. Thanks" - Brian Deren |
Rocker Guard Projects This customer had store bought rocker guards without a bar on his Jeep when he bought it. Desiring better protection he added a set of our rocker tubes to the existing guards.These bars stand off from the Jeep Aproximately 4" to help fend away from rocks and trees.
 With these guards the customer custom fabricated the guards from scratch using 3/16 plate steel and a set of our rocker tubes. The tubes were compound cut on each end so as to provide a 30 degree up angle and a stand off of 3.5"Note the piece of 3/16" plate welded at the rear of the guard as a step. This is a great example of a functional guard that cannot be bought over the counter. Roll Cage Projects Bruce Hill, Lynwood WaUtilizing our side cage tubes and a straight spreader bar, Bruce beefed up his existing cage.
 Bruce simply tied the bars into the existing hardware at the center hoop and fabbed up custom dash mounts using 1/4" angle iron.
 As you can see the advantage of installing the side tubes besides being stronger than the factory bars is the ability to drop the windshield and not loose the safety of the cage. It also eliminates the need to remove the factory side bars and stow them if you wish to drop the windshield for a day of wheelin'
Nice work Bruce!
 In this application a customer used 2 of our Universal Spreader Bars between the center hoop and a forward spreader bar spanned between the two side bars. This created a "center console" which was covered with sheet metal to provide a mounting location for switches, air gauges and an inverter mounted in between the two bars. Tube Door Projects
Tube safari doors are a great addition to any off-road rig. If you love to fabricate and want to give your doors a custom look not available with the commercially available products out there, then our Tube Door kits are for you. Made using 1.25" diameter .120 wall ERW tubing, our door kits are customizable to just about any application. We leave the tube long so that you can cut/notch them to your needs. All you need to supply is a latch, hinges and some imagination. Our current kits will fit most CJ and all YJ/TJ models. JK door kits now shipping.
For a great tube door fabrication article go here!
|
||||||||||||||||
Tire Carrier Hinge KitEasily one of our most popular kits this hub, spindle and bearing combination is an extremely versatile component that can be used to build not only tire carriers but anything that needs a smooth and sturdy hinge.
Package Contains |
