Trail stingers

Our "Trail Stinger"  is a single bend hoop similar to the Poison Spyder trail stinger. It's about 27" tall and is designed to angle out about 25-30 degrees, can be attached to the front or top of the bumper. 

Price:  $50.00

Our tall "Tall Trail Stinger" is about 36" long, single bend, and is intended to be mounted at a 45 degree angle off the front of the bumper, similar to the PSC Competition Stinger.

Price $55.00

All stingers are made using 1.75" x .120 ERW mild steel round tubing.

Rear Stinger Kit

Rear “Stinger Style” Tire Carrier. This kit consists of 5 tubes; the main hoop, 2 side braces, and a center bar with extension for the tire mount. Made of 1.75” x .120” ERW tubing it is approximately 50” tall and 24” wide at the base. It is designed to lean back at a 15 – 20 degree angle and will easily hold a 37x14.5 tire.

  Price: $170

Grill hoop for TJ/LJ. Designed to weld directly to most winch mounts; in place of the factory sway bar; or onto your custom front framework. Bends curve closely around the headlights and follow the grill line down to the frame leaving just enough clearance for the factory bumper/sway bar mounting bolts. Can be welded directly to the frame if you're running an Anti-Rock style sway bar or no sway bar at all. As pictured it fits with a 1" body lift if you are attaching to a winch mount, or can be cut to fit in place of the sway bar and mounted directly to the frame if you're not using a b/l. Specify option.

Option 1 - Winch plate mount with 1" body lift
Option 2 - Frame mount with 1" body lift
Option 3 - Winch plate mount W/O body lift
Option 4 - Frame mount W/O body lift

 
Shipping wt: 15 lbs
Price: $65.00